If you need help connecting to the network refer to your device documentation on the provided CD. (You can change the network name and password later.) Select the option to automatically connect to this network in the future. Connect to the network name shown in the Quick Start Guide that came with your router.If you have a modem router, plug the other end into any available port. Plug one end of the included ethernet cable to the yellow Internet port on your new router. If you have a modem, plug the other end into the Ethernet (LAN) port on the modem. Connect your new router to your modem or modem router.Ī Modem OR B Modem-Router Plug one end of the included ethernet cable into the yellow Internet port on your new router.Make sure the power switch is in the | (ON) position If replacing an existing router, disconnect that router first.Setting up as a traditional router or as the parent node for mesh Wi-Fi? Go to Wi-Fi > Basic Wireless Settings and click on Add a new node. ![]() Log in to the router with the router password.Note-If none of those options take you to the setup wizard, go to for more help. If you are using a modem router (gateway), you might need to enter 192.168.10.1. local in a web browser o You also can enter 192.168.1.1 in a browser to start setup. Using a computer or mobile device, connect to your parent router (the one connected to your modem) wirelessly or with an ethernet cable.You can do this in the Administration tab of the router’s settings or by pressing and holding for 10 seconds the reset button on the back of the router. If you have used this router before, reset it to factory default settings before adding it to your mesh Wi-Fi. How to install your routerĪdding this router to your existing mesh Wi-Fi? Please contact for questions or GPL source code requests. Note-Licenses and notices for third-party software used in this product may be viewed on. In addition to this user guide, you can find help at /support/RT1800(documentation, downloads, FAQs, technical support, live chat, forums) Setting Up: Basics Where to find more help Power switch (7) -– Press | (ON) to turn on the router. Power port (6)- Connect the included AC power adapter to this port. ![]() USB 3.0 port (5)- Connect and share a USB drive on your network. The light under the port will light up only when an Ethernet cable is plugged in and there is data traffic on the cable. Internet port (4)- Connect an Ethernet cable to this port and to your modem. The lights under the ports will light up only when an Ethernet cable is plugged in and there is data traffic on the cable. Reset button (2)-Press and hold for until the power LED starts flashing to reset the router to factory settings.Įthernet ports (3)- Connect Ethernet cables (also called network or internet cables) to these Fast Ethernet (10/100/1000) ports and to other wired devices on your network. The light under the button will blink while WPS pairing is active. Wi-Fi Protected Setup™ (WPS) button (1)-– Press to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. Internet status light-Is solid white when connected to the internet and solid yellow when not connected. Power light-Blinks white while the router is starting up and during WPS pairing. 7.1 Related Manuals / Resources Product Overview Front
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |